INDUSTRIAL AUTOMATION
     

ASEM invites you to
SPS IPC Drives 2015 in Nuremberg

 

 

Dear Customer,

We will showcase our latest releases at SPS IPC Drives 2015 in Nuremberg on the 24th, 25th and 26th of Nuremberg.

Join us at Pavilion 7, booth 370, and find out how you can solve your automation challenges faster, smarter, and cost-efficiently with the new ASEM solutions.
Take the opportunity to exchange ideas with our engineers while tasting our typical Italian cuisine in the hospitality area. We will welcome you with a delicious gift!

In the meanwhile, you can find a preview of what you will see at our booth:


LB2200 & BM2200
Book Mounting PAC & PC based on Intel Bay Trail platform

The fanless LB2200 is the new ASEM book mounting Programmable Automation Controller, designed for installation in industrial cabinets. LB2200 is based on the Intel® Bay Trail™ SoC (System on chip) platform, with a Quad Core Celeron J1900 processor 2.0 GHz(2.42 GHz Burst Frequency), and Windows 7 or Windows 10 (Embedded and PRO versions) operating systems and it can integrate the SoftPLC CODESYS 3.X, ASEM UBIQUITY remote assistance software solution and, as an option, Premium HMI 4 visualization software. Cooled by an internal passive sink placed inside the aluminium housing, that enables fanless operation up to 50°C, LB2200 provides one DVI-I (DVI-D + VGA) output, two Ethernet 10/100/1000 Mbps interfaces and two USB 2.0 ports on the top side, to simplify the cabling of the unit inside the control cabinet. On the front side LB2200 provides LED signalling to give a better view of operating signals and, behind the front cover, it provides an external access Sata II Cfast slot, a system battery slot and one USB 3.0 port. The system provides one SATA II mSATA SSD slot or one connector for 2,5" SATA II HDD or SSD and RAM configurable up to 8 GB with a single DDR3 SODIMM module. LB2200 has a 24 V DC power supply unit with galvanic isolation and an optional integrated UPS (Uninterruptible Power Supply), with an external battery pack (also with wall book mounting), or an optional integrated MicroUPS, based on 4 supercapacitors that enable the back up of retentive data on the MRAM (Magnetoresistive RAM) memory. LB2200, as an alternative to the DVI-D output, can integrate the ASEM Remote Video Link, providing remotation of DVI-D and USB 2.0 signals up to 100 m, with an RJ45 connector output (to be used in combination with a standard CAT5 SF-UTP cable). The PAC solution can also be equipped with add-on cards, providing 1 x Ethernet 10/100/1000 Mbps + 1 x RS232/422/485 (DB15 male, optionally isolated), or 2 x RS232 (DB9 male), or 2 x CAN RAW interfaces (DB9 male).

LP40
Panel PACs with control, HMI and remote assistance

LP40 family combines in a unique solution visualisation, control and remote assistance functions. Based on the realtime Windows Embedded Compact 7 Pro OS, LP40 panels integrate the numerous and advanced features of PHMI4 visualization software, in Basic or Advanced versions, CODESYS SoftPLC 3.x and ASEM UBIQUITY. They are available with a wide range of 16 million colors LED backlight TFT LCD sizes with Aluminium (resistive touchscreen), Aluminium True Flat (resistive touchscreen) or Aluminium True Flat Multitouch front panels (glass projected capacitive touchscreen). LP40 systems are based on the ARM Cortex A9 1.0 GHz processor (Freescale i.MX6 Quad Core, Dual Core, and Dual Lite) with 1 or 2 GB system RAM (DDR3- 1600/800), 4 or 8 GB eMMC memory, a slot for a removable MicroSD memory card and 4 Mb MRAM memory (Magnetoresistive RAM) for retentive data storage at power down to be used in combination with the MicroUPS. The motherboard includes the isolated 24 V DC power supply, two 10/100/1000 Mbps Ethernet interfaces, an RS-232/422/485 configurable serial port with MPI support, two USB 2.0 interfaces and the MicroUPS (removable and easily exchangeable). LP40, optionally, can be supplied with an isolated CAN interface or an additional isolated RS-485 serial port.


VK3200
Arm Mounting PC based on Intel fifth generation Core™ processors

The new VK3200 arm mounting PCs are based on the X86 Intel® Broadwell platform with Ultra Low Voltage fifth generation Intel® Core™/Celeron processors. They are made of a full IP65 cast aluminum chassis, powder coated with anti-scratch treatment, combining robustness with ergonomics and aesthetics. VK3200 systems have two USB 3.0 IP65 ports with rear external access, one optional IP65 USB port and one optional RFID interface on the front with the possibility to install emergency button, key switches, buttons and light indicators.
The "all in one" motherboard provides two additional USB 2.0 ports, three 10/100/1000 Mbps Ethernet ports, one optional serial RS232/422/485 interface (isolated), one SATA III CFast slot, one SATA II mSATA SSD slot and RAM configuration up to 8 GB with a DDR3 SODIMM module. The VK3200 family is available with 15.6", 18.5" and 21,5" in Wide 16:9 aspect ratio 16 million color TFT LED Backlight LCDs and Aluminum True Flat front panle with 5 wires resistive touchscreen or Aluminum True Flat Multitouch front panel, with glass projected capacitive multitouch-screen.


HT3200 and PB3200
Panel PC and Box PC based on Intel Broadwell PCH-LP platform

The fanless HT3200 Panel PC and the PB3200 Box PC families are based on X86 Intel® Broadwell ULT platform with Ultra Low Voltage fifth generation Intel® Core™/Celeron processors.
The "all in one" motherboard provides two USB 3.0 and one USB 2.0 ports, three 10/100/1000 Mbps Ethernet ports, one serial RS232, one optional serial RS232/422/485 opto-isolated interface (not available on SL version), a DVI-I (DVI-D + VGA) video output, one SATA III CFast slot, one SATA III mSATA SSD slot and RAM configuration up to 8 GB with a single DDR3 SODIMM module.
HT3200 family is available with 12,1" and 15" in 4:3 aspect ratio, 17" and 19" in 5:4, 12,1" in 16:10 and 15,6", 18,5", 21,5", 24" in 16:9 aspect ratio 16 million color TFT LED Backlight LCDs and aluminium (HT), aluminium True Flat (HT-TF) front panels, with 5 wires resistive touchscreen and one USB port. The versions with 12,1", 15,6", 18,5" and 21,5" Wide LCDs are also available with Aluminum True Flat Multitouch front panels with glass projected capacitive Multitouch-screen (HT-TFM). Panels with 12,1"(4:3), 15", 17" and 19" LCDs are also available with Stainless Steel True Flat front panels (HT-TFX).


HMI40
ARM based HMI panels

HMI40 family combines in a unique solution visualisation and remote assistance functions. Based on Windows Embedded Compact 7 Pro operating system, HMI40 panels integrate the numerous and advanced features of PHMI4 visualization software, in Basic or Advanced versions and ASEM UBIQUITY remote assistance solution. They are available with a wide range of 16 million colors LED backlight TFT LCD sizes with Aluminium (resistive touchscreen), Aluminium True Flat (resistive touchscreen) or Aluminium True Flat Multitouch front panels (glass projected capacitive touchscreen). HMI40 systems are based on the ARM Cortex A9 1.0 GHz processor (Freescale i.MX6 Quad Core, Dual Core or Dual Lite) with 1 or 2 GB system RAM (DDR3-1600/800), 4 or 8 GB eMMC memory and a slot for a removable MicroSD memory card. The motherboard includes the isolated 24 V DC power supply, two 10/100/1000 Mbps Ethernet interfaces, an RS-232/422/485 configurable serial port with MPI support, two USB 2.0 interfaces and an optional MicroUPS (removable). HMI40, optionally, can be supplied with an isolated CAN interface or an additional isolated RS-485 serial port.


Remote Video Link - new remotation technology
MHR100 / MKR100

MHR100 and MKR100 industrial monitor families feature ASEM Remote Video Link technology, providing a built-in remotation of DVI-D and USB 2.0 signals up to 100 meters with a simple and economic CAT 5E SF/UTP cable.


Ubiquity 6
Remote assistance and remote control solutions

Ubiquity 6, the latest release of ASEM remote assistance software, introduces a new VPN architecture for a safer and simpler configuration of the remote connections. Starting from version 7 this new VPN architecture will provide the possibility to share Internet connectivity with LAN devices, allowing Internet access from laptops or IP phones connected to the LAN network or providing access to the web server or to Ubiquity runtime services of LAN devices.
Ubiquity 6 provides a new simple audit tool for monitoring all the Domain administration and configuration activities and starting with Ubiquity 7 it will be possible to log all Ubiquity sessions with activities and chat contents accessible to Domain administrators.
With the new Ubiquity Private Server package, it is possible to build up and manage a redundant and distributed private server infrastructure in complete autonomy, installed on dedicated systems or cloud servers.


Premium HMI 4
Visualization software

The software platform Premium HMI 4 provides a powerful graphics rendering engine supporting the latest visualization technologies such as 16 million colours XAML graphic objects, sophisticated shading and transparency effects.
With the latest version, ASEM will introduce new Multitouch pointing gestures as "Drag & Drop", Scroll and dual touch, a VBA interface for dynamic control of communication parameters (on runtime), a new SMS notifications dispatcher based on SMPP protocol and an Automatic tag import from CODESYS workbench for a better integration of control and visualization development environments.
Furthermore, Premium HMI 4 will soon support OPC UA client technology (Q1 2016), the new communication standard in Industry 4.0, allowing vertical communication to SCADA, MES and ERP systems.


F1 Race Car Simulator
Feel the thrill of a real F1 race car

© 1994-2015 - ASEM S.p.A. | All right reserved | P.IVA 0167857030888
website: asem.it - email:
industrialautomation@asem.it